Archive for the ‘computer troubleshooting’ Category

computer troubleshooting

Wednesday, March 17th, 2010

computer troubleshooting

With advances in technology can now support many hot-pluggable devices such as USB and 1394. However, essentially operations of most of the material must be completed after the power outage, or it can cause computer crashes or damage Standing Hardware.

Sometimes the team can go die if you remove the wireless card suddenly its related port. This error occurs with a relatively high frequency. The reason for this failure is happening is that many PC users that USB is a wireless network card or PCMCIA port supports hot plug, and you can plug and play. In fact, they take this plug and play, more chances and few of them know that this network adapter Wireless not be connected to work, because not only is it easy to damage the card and its corresponding computer interface, but can also cause system crashes.

If your computer crashes because the connector wireless network card, first you must check if you have done that when the card is working, if yes, you have to restart your computer.

In addition, to avoid this error, you stop better processes like the transmission of information and it is best to disable wireless network adapter in Device Manager before to leave.

Step 1 Click Start and select Control Panel.

Step 2 Right Double-click System to open the System Properties sheet.

Step 3 Click Hardware and click Device Manager.

Step 4 Click the Network adapters and display its properties.

Disable Step 5 and plug the card.

Want to know more tips to handle your net card problems? Visit Driver Update Tool today, our team will do our best to offer you more!

http://www.driverupdatetool.com/articles/

Any idea to solve my problems, just stopped working?

The light on the computer and monitor Flash instead to stay put. There is nothing appears on my screen. I checked my usual, all connected, and so on. Ideas to save me a trip to Best Buy? Thank you. . .

First, to check that the keyboard and mouse connected. Then check the power electric. Turn and keep the hand near the vents to supply energy or listen here to see if fans are running. They do not die, but not necessarily all at once. It is possible that the party is to provide fire voltage lights that flash still works while others are inactive. Replacement is not too difficult or too costly. Open the case and ensure that all power connectors feel good. Unplug each carefully and immediately re-connected as the other suggested that responds to hear a sound or a series beeps from the motherboard the first time you turn. If there are sounds, make notes and check what they mean. If no beeps or error codes that do not contribute much, I would check the memory and the CPU next. Make sure you have good electrical connections, eliminating and down. Check the video card that follows. First, try to remove and re-seat him. Ideally, you know someone who has a card Expired, but running. Try to put that to see what happens. From there, things become more complicated, but my approach is to change things with redundant components. A bit difficult to do if you're not a geek geekish and has no friends, so sure what to suggest other machine into a computer store.

Computer Troubleshooting & Tech Support : How to Clean a Laptop Screen

  • Share/Bookmark

computer troubleshooting

Monday, March 15th, 2010

computer troubleshooting
computer troubleshooting

Troubleshooting computer network is one of the descriptions of the most important tasks of network administrators, system administrators, technical networks and consultants. A computer network may have different types of problems that can be infected by viruses and spyware attacks access by hackers and unauthorized users may face problems of lack of connectivity due to faulty network devices or configurations. The following is a list of network troubleshooting basic commands that are embedded in the operating systems Windows and UNIX, etc. The right to use These commands can help troubleshoot a lot to diagnose and solve problems with your computer network.

PING

Ping is the controls the most important troubleshooting and check the connectivity with other computers. For example, the IP address is 10.10.10.10 your system and manage their network servers "IP is 10.10.10.1 and you can verify connectivity from the server using the ping command in the following format.

In DOS, type Ping 10.10.10.1 and press Enter

If you receive the server response, then connectivity is good and if you receive the error message like this "Request time out" This means that there is a problem with the connection to the server.

IPCONFIG

IPCONFIG is another major order in Windows. Displays the IP address of the computer and also displays the DNS, DHCP, gateway addresses and the network subnet mask.

A DOS prompt type ipconfig and press Enter to display the IP address of your computer.

Inconfig In DOS, type / all and press ENTER to see the details.

NSLOOKUP

NSLOOKUP is a command protocol TCP / IP and control function alias domain, the DNS records, operating information system by sending requests to servers of Internet domain names. You can correct errors in your DNS server Network

HOSTNAME

Hostname command displays the team name.

On behalf of the host DOS prompt, type and press Enter

NETSTAT

NETSTAT shows the usefulness of statistics and current established TCP / IP on your computer.

NBTSTAT

NBTSTAT help solve the problem of NetBIOS name resolution problems.

ARP

ARP displays and modifies the IP address table physical translation is used by ARP.

FINGER

Finger command is used to retrieve information about a user on a network.

TRACERT

Tracert command is used to determine the path of the remote system. This tool also provides the number of hops and the IP address of each section. For example, if you want to see the number of hops (routers) are trying to reach any sense and what is IP address of each hop then use the following command.

In tracert www.yahoo.com type command prompt will see a list of all the hops and their IP addresses.

Traceroute

Traceroute is a very useful command for debugging network and is used in the location of the server slows transmission on the Internet and displays the route between the two systems

ROAD

Route command allows you to input routing table manually.

Hopefully mentioned commands will help you diagnose your problems troubleshooting computer networks.

B. Bashir manages this website Networking Tutorials and regularly writes articles on various topics such as Computer Networking, Network Troubleshooting Tips Wireless Networking, Computer Hardware, Certifications, How Tos, Network Security Guide and computer tips.

Need help with my computer? Troubleshooting?

I have an Acer Aspire 3000 that I had a couple of years. The not have battery power for long so I guess I need a new one. The problem is that my team is not receiving power or something. I must keep the cable on my computer at work. Sometimes not even work and when you press the power button lights indacator little for the battery and the output power or even blink. Is the clutter of cables? Where can I get a new one if I need it?

not resemble the battery @ All … that you hold the power cable to hold a charge, you probably need a new power cord for the model Portable.

Computer Troubleshooting & Tech Support : How to Edit a Bin File

  • Share/Bookmark

computer troubleshooting

Wednesday, March 10th, 2010

computer troubleshooting
computer troubleshooting?

When I turn on my PC, I get an error message that says my main drive (HDD) is not. Below that, it says to press F1 to continue or F2 to run the setup utility. I'm confused about all this and I do not know what to do. Hopefully, someone can help me.

Normally this message occurs when the hard drive is dead. The first thing to check would be to open the landlord and make sure all cables that leading to the unit are connected and secure. If they are then the following would check the BIOS to see if there is a free hard disk utility test. Run this and see if there is no recommendation. Apart from that hard drive is probably toast and beyond recovery. There have been rare here, where you can use ERD Commander to retrieve some data from the drive after a while cool or refrigerate for a while. Hope this helps

  • Share/Bookmark

computer troubleshooting

Tuesday, March 9th, 2010

computer troubleshooting
issue of computer troubleshooting?

I was working on an internal computer and everything works fine even cd drives work but nothing really works external. This worked well the first 1 or 2 new firms, but now the external ports is only loaded as I would say. Is loaded my ipod or turn an optical mouse, but no signal caps / / num scroll lock keyboard and mouse does nothing. I think it may be a problem with the motherboard, but am not sure … The computer is a Gateway 420gr

Fee only means +5 V standby power available from power supply to the motherboard. But it seems that the power supply is not receiving any signal that fully turn on main voltage rails. Try the following: 1. Reset my CMOS using the jumper switch on motherboard, or simply by removing CMOS battery for at least 30 sec. 2. The power button may have a problem. Turn computer directly into the motherboard with a short short the pins that connect to the power button. A standard PC provides a unique sound at the beginning of the boot process. If there is a problem with the devices installed, multiple (error) beeps are generated.

  • Share/Bookmark

computer troubleshooting

Friday, March 5th, 2010

computer troubleshooting

  • Share/Bookmark

computer troubleshooting

Thursday, March 4th, 2010

computer troubleshooting
How much do Americans spend each year on computer installation, troubleshooting and repair?

I not spend a dime, except for the parties because I can do it myself, lol. However, for non-technical savy, which can cost $ 60 for a locally owned shop to $ 250 for a house call geeksquad, for repairs. For facilities that I think the rate is between $ 150 and $ 300 depending on your installation and obtain what is involved in installation, such as data migration from an old computer or install any additional hardware, software or networks.

  • Share/Bookmark

computer troubleshooting

Tuesday, March 2nd, 2010

computer troubleshooting
Institute of hardware that I take part in Delhi? I want to open a computer troubleshooting?

Institute of hardware that I take part in Delhi? i want to open a computer troubleshooting, repair and Internet service?

My suggestion to you is not joining any institutes. It donot teach anything worthwhile. Everything that can be easily taught perfromed by anyone. I suggest you read the book Trouble 'Shooting PC' by Mark Minasi. I read the book and probably can repair any computer as good as any professional. Besides DIGIT magazine subscription and you never have to look back for any help.

  • Share/Bookmark

computer troubleshooting

Tuesday, March 2nd, 2010

computer troubleshooting

  • Share/Bookmark

Saturday, February 27th, 2010
  • Share/Bookmark

computer troubleshooting

Monday, February 22nd, 2010

computer troubleshooting
computer troubleshooting

Troubleshooting Tips PC is very useful when the computer encounters an error. Note that it is very common for the team to find errors and 90% are easily solved by you. However, the remaining 10% of problems are more difficult that requires specialist equipment to resolve. So here I wish to highlight the solutions to problems that can be easily solved by you, without the need for a hardware engineer computer.

Today, the most common problems are the problem restart the computer, slow PC performance, errors software related to computers and cable connection is incorrect. Required great patience in these situations. Here are some suggestions for troubleshooting PC that can be useful for solving problems with computers.

To reboot issues:

1] If the problem occurs, first restart the computer. Many of the problems [small] correct themselves after a restart.
2] Check with the cables if properly connected or not? Sometimes, loose connections may result in the recovery system automatically.
3] Remove the disc in the drive and restart.
4] Open the box and connect the cables correctly.
5] If the above solutions may not correct the problem, then the system software may be faulty. If so, use the software CD that came with your PC or operating system CD to repair system.

These troubleshooting tips for PC only works in 90% of cases. For the remaining 10%, you need a technical expert.

For Slow PC Performance

The operating systems of Microsoft Windows can be made to run faster than their default settings installed by making small changes at the user level. These adjustments will improve PC performance.

1] fragment your hard drive:

Navigate -> Home -> All Programs -> Accessories -> System Tools -> Disk Defragmenter -> Click "fragment".

2] Remove unused fonts:

Go to -> Control Panel -> Power -> Remove or backup sources of spam.

3] Speedup File Explorer:

Go to -> Computer -> Tools -> Options Records -> Display -> Disable "Automatically search folders and network printers" -> OK.

4] Disable indexing Services:

Go to -> Control Panel -> Add / Remove Programs -> Add / Remove Windows Components -> Disable "Indexing Services" -> OK.

5] System Performance Properties:

Go to -> Computer -> Properties -> Advanced -> Performance -> Settings -> remove all unnecessary visual effects -> OK

However Tips PC Troubleshooting help improve the performance of your PC slow.

Visit http://www.techzene.com for more detailed information on PC Troubleshooting Tips and all Windows related information.

What is the best website or book for troubleshooting hardware?

I am a hardware engineer in the field computer, but sometimes in my work I found very strange and unknown problems on computers is why I want to share with others and I want to solve problems plz help me and if any body can share their problems.

participate in forums and ask questions. or Google is here. http://www.commediait.com

Gateway Computer Troubleshooting : About Gateway Laptop Overheating

  • Share/Bookmark